For engineers, hobbyists, and tech enthusiasts exploring practical 13.56 MHz RF generation, a reliable generator module is essential. This article highlights five suitable options, outlining each product’s capabilities, ideal use cases, and installation notes. Whether you need low-noise transmission, wide frequency ranges, or easy integration with development boards, the selections below cover a spectrum of common RF project requirements. Review the quick-reference table to compare key features at a glance, then dive into detailed product insights to help inform your choice.
| Product | Frequency Range | Output Power | Key Benefit |
|---|---|---|---|
| Transmit Source Module 13.56MHz | 13.56 MHz | 7–23 dBm | Adjustable power with easy installation |
| Upgraded RF Signal Generator SG-A9 | 35 MHz – 4.4 GHz | Approx. 1 mW | Wide range and dual modes |
| Transmit Signal Source Module 13.56MHz | 13.56 MHz | 7–23 dBm | Low noise, easy setup |
| MAX2870 RF Signal Generator | 23.5 MHz – 6 GHz | Depends on external configuration | High precision with sweep and single modes |
| Walfront ADF4351 Development Board | 35 MHz – 4.4 GHz | Depends on configuration | Three-wire SPI control, frequency hopping |
Transmit Source Module 13.56MHz Power Adjustable

The Transmit Source Module operates at 13.56 MHz with a 1.4–8.8 Vpp input range driving a 50-ohm RF load. It offers adjustable transmitting power from 7 dBm to 23 dBm, enabling adaptation to different test setups or environmental constraints. The device features a simple structure that is easy to install and operate, making it suitable for quick prototyping and RF lab testing. Its compact design supports straightforward integration into compact RF projects and signal chains.
Upgraded RF Signal Generator SG-A9

With a wide operational range of 35 MHz to 4.4 GHz, the SG-A9 is designed for versatility across multiple applications. It supports dual modes, including single-frequency and sweep, offering flexibility for testing filters, receivers, and RF front-ends. The device outputs about 1 mW of power and uses a sine wave output, which is suitable for many RF measurement and development tasks. This generator suits users needing a broad spectrum in a compact package and straightforward mode switching.
Transmit Signal Source Module 13.56MHz

This module provides adjustable output power from 7 dBm to 23 dBm, enabling flexible signal strength for varied RF needs. Its low-noise design helps ensure clean transmission, which is important for precise measurements and consistent results in RF experiments. Installation is described as easy, with a user-friendly PCB layout that supports rapid integration into existing systems.
MAX2870 RF Signal Generator

Centered on the MAX2870 IC, this generator covers 23.5 MHz to 6 GHz with modes for single tone and sweep operation. It includes data saving features—data can be automatically saved after power loss, and the system can resume previous work upon power-on. The device provides a robust option for high-precision frequency control and repeatable RF testing, suitable for advanced lab environments and development rigs.
Walfront ADF4351 Development Board

The Walfront ADF4351 board uses a three-wire SPI design to control a frequency synthesizer in the 35 MHz to 4.4 GHz range. It supports features like point frequency sweep and frequency hopping, with control pins exposed for easy interfacing to host software. The board benefits from a thoughtful layout and a convenient control scheme, making it a strong option for learning PLL-based synthesis and rapid RF prototyping.
Buying Guide
Key purchase considerations help users select the right 13.56 MHz RF generator for their needs. Consider frequency range compatibility, output power, noise performance, and ease of integration with existing hardware.
- Frequency and coverage: For projects centered on 13.56 MHz, prioritize modules with explicit 13.56 MHz operation or broad coverage when you require experimentation beyond the base band.
- Output power and drive capability: Determine whether you need adjustable power levels (7–23 dBm in several options) or a fixed setting. Ensure the module can drive your intended RF load safely.
- Noise and signal quality: Low-noise designs help maintain clean transmissions, which is crucial for measurements, testing, and repeatability of results.
- Ease of integration: Look for devices with straightforward installation, documented interfaces, and simple control schemes, especially if you plan to integrate with microcontrollers or development boards.
- Mode options: Some generators offer single-frequency and sweep modes, which can be valuable for testing filters, amplifiers, and receivers. Choose based on your testing workflow.
- Control interfaces: Boards with SPI or software-controllable interfaces enable automation and remote operation, beneficial for lab automation or complex experiments.
- Reliability and support: Consider the availability of documentation, community forums, and vendor support to assist with troubleshooting and optimization.
When selecting among these options, align your choice with the primary application: lab testing, development prototyping, or educational experimentation. For projects focusing on 13.56 MHz operation with simple setup, the first and third products provide straightforward, low-noise solutions. For broad-range testing and more advanced features such as frequency hopping or auto-saving data, the MAX2870-based and Walfront options offer deeper functionality. Sensible RAM-like features, waveform options, and firmware support can influence long-term project viability and expandability.